Simpliguides

Simpliguides › Mobile Devices › iPhone

How to make your iPhone's screen flash for notifications

An iPhone can give you a visual signal when a call or notification comes in, as well as, or instead of, a sound or a buzz. For years that meant the camera flash on the back blinking. Since iOS 26.2 the screen itself can flash too, which is the one you'll see when the phone is lying face up on a desk. This guide turns the feature on and walks through the three choices it gives you.

What you'll need: An iPhone running iOS 26.2 or later for the screen flash. Older versions still have the camera-flash option, and the steps are the same up to step 5.

1

Open Accessibility settings

Open Settings and tap Accessibility.

2

Tap Audio & Visual

Scroll to the Hearing section and tap Audio & Visual.

3

Tap Flash for Alerts

Scroll to the bottom of the Audio & Visual screen and tap Flash for Alerts.

Can't find it? Go back to the main Settings screen, pull down to show the search bar and type flash for alerts.
4

Turn on Flash for Alerts

Tap the Flash for Alerts switch so it turns green. The options below it only appear once this is on.

5

Choose what flashes

Pick one of the three options: LED Flash uses the camera flash on the back of the phone, Screen briefly lights the whole display white, and Both does the two together.

If the phone usually sits face up, choose Screen. If it's often face down or in a dark room, LED Flash is the one you'll notice. Both covers either case.

On a phone running anything older than iOS 26.2 there is no choice to make here. The switch from step 4 controls the camera flash on its own.
6

Decide when the flash should fire

Two more switches sit on the same screen. Flash in Silent Mode keeps the flash working when the phone's ring switch or Action button has silenced it, which is when most people want it most. Flash While Unlocked makes the flash fire even while you're using the phone. Leave that one off unless you really want the screen to blink mid-task.

There's nothing to save. The next call or notification that arrives will flash.

Variations

Turn the flash off again

Go back to Settings › Accessibility › Audio & Visual › Flash for Alerts and tap the main switch so it turns grey. Your choice of LED, Screen or Both is remembered for next time.

The same setting on an iPad

The path is the same: Settings › Accessibility › Audio & Visual › Flash for Alerts. An iPad has no rear flash, so the screen option is the one that does anything there.

Add a vibration instead of, or as well as, a flash

If what you're after is a stronger buzz rather than a light, that lives in Settings › Sounds & Haptics. Flash for Alerts and haptics work independently, so you can have both on.

Troubleshooting

I only see a single switch, with no Screen option

The screen flash arrived in iOS 26.2. Open Settings › General › Software Update and install whatever is offered. If the phone says it's up to date but the version shown is below 26.2, it can't run that update, and the camera flash is the only option available.

The screen flashes once but the camera flash blinks several times

That's how it's designed. The LED blinks repeatedly for a new notification or call, while the screen gives one short burst of white. If you keep missing the screen flash, switch to Both or back to LED Flash.

Nothing flashes while I'm using the phone

By default the flash only fires when the phone is locked or the screen is off. Turn on Flash While Unlocked on the Flash for Alerts screen if you want it while the phone is in use. Separately, if nothing flashes when the phone is on silent, check that Flash in Silent Mode is on.

Advertisement

Need a calculator rather than a guide? Try Simplicalcs →